Aspire Tigon Kit

Aspire continues to conquer the market in versatility with the remarkable Aspire Tigon Starter Kit with two different resistors for MTL or DTL use. This elegant pen-style device has compact dimensions of 123 mm x 22.3 mm with a high quality design from top to bottom. The Aspire Tigon Mod has a zinc alloy construction and a built-in 1800mAh rechargeable battery with a 3.3-4.2V output. A battery life indicator along the chassis glows red when the battery life is 3.5 V or less, blue when 3.5 to 3.8 V, and pink when it is 3.8 V or higher . When the battery is fully charged, the indicator light will flash twenty times and then turn off to conserve battery life. Simply use the standard Micro-USB port on the back of the mod to charge the built-in 1800mAh battery. For your convenience, the Aspire Tigon Starter Kit has a charging current of 2A so you can charge your device in the blink of an eye. This device has a simplistic design with a single shutter button that is pressed five times to turn it on or off. Operating in Bypass mode, the Aspire Tigon battery provides a continuous power-on time of ten seconds before shutting down for safety reasons. Safety features in addition to automatic shutdown include short circuit protection, low voltage protection, overload protection and overheating protection.

The Aspire Tigon Tank with dual Sub-Ohm and MTL functions is handmade with superior stainless steel and durable quartz glass, while it includes two Delrin 510 nozzles with a unique curvature. The longer spherical tip tip is designed to improve mouth-to-lung drains, while the shorter drip tip has a wider inner diameter to improve direct evacuation of the lungs. This tank has a capacity of 2.0mL of e-liquid and can be filled with both standard e-liquids and nicotine salts. To comfortably fill the tank, pull the top cover and then open it by sliding it as indicated by a small Aspire logo. This childproof system will expose the filling port with a silicone seal that provides greater resistance to leaks. Inside the tank there is a BVC resistor of 0.4 ohms pre-installed with a nominal power of 23-28 W for the DTL function. This kit also includes a 1.2 ohm BVC resistor with a nominal power of 10-12W for special MTL for nicotine salts. These resistors are placed under pressure and pushed up through the bottom of the inner chamber after the base of the tank has been removed. This tank has a truly unique internal design consisting of spring-loaded sleeves that pass through the evacuation ports of the internal chamber to keep the e-liquid inside the tank even when resistances are changing. The base of this tank has a unilateral air flow that can alternate between five small holes for the use of MTL or a slot style hole for direct use of the lungs.

Features:

2ml capacity
1800mAh battery
BVC 1.2ohm and 0.4ohm resistor
Size 123mmx22.3mm
Weight 274gr
Material Aluminum Alloy
Maximum Power 28W
Voltage Range 3.5V – 3.8V
Easy and anti-leak top filling system
Childproof tank
Easy and leak-free resistance change
Lower air flow
Five-slot air flow for MTL
Led indicator that shows the battery status
Multiple Security Protection
The Aspire Tigon Kit comes with:

1x Tigon TPD Kit
1x Spare Pyrex
1x Extra Drip Tip
2x Resistors (0.4ohm pre-installed and 1.2ohm)
10x Spare tires
1x Warranty Card
1x Screw Adjustment Tool
1x User Manual
1x USB cable